Brine Tubing Heavy-duty ½ (LDPE)
Tubing & Fitting Compatibility Master Chart
| Tubing Description | OD (Outside) | ID (Inside) | Use Push-In Fitting | Use Barbed Fitting |
| ¼” RO Tubing | 1/4″ | ~4mm | 1/4″ Push-Fit | 4mm / 5mm Barb |
| ⅜” RO Tubing | 3/8″ | ~6mm | 3/8″ Push-Fit | 6mm Barb |
| ⅜” Brine Tubing | 3/8″ | 1/4″ | 3/8″ Push-Fit | 1/4″ (6mm) Barb |
| 6/4mm Dosing Tube | 6mm | 4mm | 6mm Metric | 4mm Barb |
| 8/5mm Dosing Tube | 8mm | 5mm | 8mm Metric | 5mm Barb |
| 10/7mm Metric Tube | 10mm | 7mm | 10mm Metric | 7mm Barb |
| 12/8mm Dosing Tube | 12mm | 8mm | 12mm Metric | 8mm Barb |
| ½” Brine (Heavy) | 1/2″ | ~10mm | 1/2″ Push-Fit | 10mm Barb |
| ½” Drain (PVC) | ~16mm | 1/2″ | Not Compatible | 1/2″ (13mm) Barb |
💡 How to Use This Chart:
1. Are you using a “Push-In” (Quick-Connect) Fitting?
Look at the OD (Outside Diameter). The tube must match the fitting size exactly.
Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!
2. Are you using a “Barbed” (Hose-Tail) Fitting?
Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.
Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.
3. Are you using a “Jaco” (Compression) Fitting?
These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.
Description
A commercial-grade, ½-inch Outside Diameter (OD) polyethylene tube engineered for high-capacity water softeners and large-scale water treatment systems. This heavy-duty “Poly” tubing is specifically designed to handle the increased flow rates and higher vacuum pressures required for regenerating large resin tanks, ensuring consistent performance in demanding environments.
Uses & Applications:
-
Commercial Water Softeners: Primary brine draw line for high-capacity systems (duplex and triplex units).
-
Industrial Filtration Drain Lines: High-flow discharge for RO concentrate and backwash cycles.
-
Large-Scale Hydroponics: Main nutrient feed lines for commercial greenhouse setups.
-
Aquaculture: Durable air or water transfer lines for large fish holding tanks.
Benefits:
-
High Flow Capacity: The larger ½” diameter significantly reduces friction loss, allowing for rapid brine transfer in large systems.
-
Superior Wall Strength: Extra-thick LDPE wall prevents “vacuum collapse” during the suction stage of the regeneration cycle.
-
Chemical Resilience: Naturally resistant to concentrated salt brines, chlorine, and most common water treatment chemicals.
-
Environmental Stress Resistance: Engineered to resist cracking and fatigue, even when subjected to repeated pressure cycles.
Compatible Systems:
-
Large Softener Valves: Standard on commercial Fleck (2850/2900) and Clack (1.25″/1.5″) control valves.
-
Fittings: Standard ½” (12.7mm) Quick-Connect or Compression (Jaco-style) fittings.
-
Industrial Barbs: Compatible with ½” (13mm) barbed hose-tails when secured with a hose clamp.
Size & Dimensions:
-
Outer Diameter (OD): ½” (12.7 mm)
-
Inner Diameter (ID): ⅜” (9.5 mm)
-
Wall Thickness: ~1.6 mm
-
Length: Sold per meter
-
Weight: ~0.07 kg per meter

Reviews
There are no reviews yet.