Dosing Tube 8/5mm – Clear (PVC)

Tubing & Fitting Compatibility Master Chart

Tubing Description OD (Outside) ID (Inside) Use Push-In Fitting Use Barbed Fitting
¼” RO Tubing 1/4″ ~4mm 1/4″ Push-Fit 4mm / 5mm Barb
⅜” RO Tubing 3/8″ ~6mm 3/8″ Push-Fit 6mm Barb
⅜” Brine Tubing 3/8″ 1/4″ 3/8″ Push-Fit 1/4″ (6mm) Barb
6/4mm Dosing Tube 6mm 4mm 6mm Metric 4mm Barb
8/5mm Dosing Tube 8mm 5mm 8mm Metric 5mm Barb
10/7mm Metric Tube 10mm 7mm 10mm Metric 7mm Barb
12/8mm Dosing Tube 12mm 8mm 12mm Metric 8mm Barb
½” Brine (Heavy) 1/2″ ~10mm 1/2″ Push-Fit 10mm Barb
½” Drain (PVC) ~16mm 1/2″ Not Compatible 1/2″ (13mm) Barb

💡 How to Use This Chart:

1. Are you using a “Push-In” (Quick-Connect) Fitting?

Look at the OD (Outside Diameter). The tube must match the fitting size exactly.

  • Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!

2. Are you using a “Barbed” (Hose-Tail) Fitting?

Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.

  • Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.

3. Are you using a “Jaco” (Compression) Fitting?

These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.


⚠️ The “Golden Rule” of Leak Prevention

Regardless of the fitting type, the tube must be cut perfectly square (90 degrees).

  • Do not use scissors! Scissors crush the tube into an oval shape, which prevents the O-ring from sealing.

SKU: TQA17.TB.0805 Category:

Description

A high-flow, 8mm metric flexible PVC dosing tube designed for precision chemical delivery and visual fluid monitoring. Engineered for systems requiring a higher delivery volume (up to 7.1L/hr), this tubing offers the ideal balance of flexibility for easy routing and a reinforced wall thickness to prevent suction-side collapse during high-output dosing cycles.


Uses & Applications:

  • High-Output Dosing: Optimized for 7.1L/hr peristaltic dosing pumps and industrial metering.

  • Aquarium & Hydroponics: Ideal for the delivery of nutrients, buffer solutions, and top-off water.

  • Laboratory Fluid Transfer: Used in environments where monitoring for air bubbles, fluid movement, or chemical precipitates is critical.

  • Low-Pressure Beverage Dispensing: Suitable for non-pressurized, food-safe liquid transfer.

Benefits:

  • Crystal Clear Monitoring: 100% transparent wall allows for instant visual verification of flow, bubbles, or blockages.

  • Pliable & Flexible: Soft PVC construction easily stretches over 5mm barbs for a natural, airtight seal.

  • Smooth Internal Bore: High-polish internal surface reduces friction and prevents sediment buildup, ensuring consistent flow rates.

  • Non-Toxic Material: Formulated to be safe for sensitive aquatic environments and general fluid transfer.

Compatible Systems:

  • Pumps: 7.1L/hr Peristaltic Dosing Pumps and high-flow metering units.

  • Fittings: Standard 8mm Metric Quick-Connect (Push-in) fittings.

  • Barbs: 5mm Metric barbed hose-tail connectors.

Size & Dimensions:

  • Outer Diameter (OD): 8 mm

  • Inner Diameter (ID): 5 mm

  • Length: Sold per meter

  • Weight: ~0.04 kg per meter

Reviews

There are no reviews yet.

Be the first to review “Dosing Tube 8/5mm – Clear (PVC)”

Your email address will not be published. Required fields are marked *