Dosing Tube 8/5mm – Clear (PVC)
Tubing & Fitting Compatibility Master Chart
| Tubing Description | OD (Outside) | ID (Inside) | Use Push-In Fitting | Use Barbed Fitting |
| ¼” RO Tubing | 1/4″ | ~4mm | 1/4″ Push-Fit | 4mm / 5mm Barb |
| ⅜” RO Tubing | 3/8″ | ~6mm | 3/8″ Push-Fit | 6mm Barb |
| ⅜” Brine Tubing | 3/8″ | 1/4″ | 3/8″ Push-Fit | 1/4″ (6mm) Barb |
| 6/4mm Dosing Tube | 6mm | 4mm | 6mm Metric | 4mm Barb |
| 8/5mm Dosing Tube | 8mm | 5mm | 8mm Metric | 5mm Barb |
| 10/7mm Metric Tube | 10mm | 7mm | 10mm Metric | 7mm Barb |
| 12/8mm Dosing Tube | 12mm | 8mm | 12mm Metric | 8mm Barb |
| ½” Brine (Heavy) | 1/2″ | ~10mm | 1/2″ Push-Fit | 10mm Barb |
| ½” Drain (PVC) | ~16mm | 1/2″ | Not Compatible | 1/2″ (13mm) Barb |
💡 How to Use This Chart:
1. Are you using a “Push-In” (Quick-Connect) Fitting?
Look at the OD (Outside Diameter). The tube must match the fitting size exactly.
Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!
2. Are you using a “Barbed” (Hose-Tail) Fitting?
Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.
Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.
3. Are you using a “Jaco” (Compression) Fitting?
These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.
⚠️ The “Golden Rule” of Leak Prevention
Regardless of the fitting type, the tube must be cut perfectly square (90 degrees).
-
Do not use scissors! Scissors crush the tube into an oval shape, which prevents the O-ring from sealing.
Description
A high-flow, 8mm metric flexible PVC dosing tube designed for precision chemical delivery and visual fluid monitoring. Engineered for systems requiring a higher delivery volume (up to 7.1L/hr), this tubing offers the ideal balance of flexibility for easy routing and a reinforced wall thickness to prevent suction-side collapse during high-output dosing cycles.
Uses & Applications:
-
High-Output Dosing: Optimized for 7.1L/hr peristaltic dosing pumps and industrial metering.
-
Aquarium & Hydroponics: Ideal for the delivery of nutrients, buffer solutions, and top-off water.
-
Laboratory Fluid Transfer: Used in environments where monitoring for air bubbles, fluid movement, or chemical precipitates is critical.
-
Low-Pressure Beverage Dispensing: Suitable for non-pressurized, food-safe liquid transfer.
Benefits:
-
Crystal Clear Monitoring: 100% transparent wall allows for instant visual verification of flow, bubbles, or blockages.
-
Pliable & Flexible: Soft PVC construction easily stretches over 5mm barbs for a natural, airtight seal.
-
Smooth Internal Bore: High-polish internal surface reduces friction and prevents sediment buildup, ensuring consistent flow rates.
-
Non-Toxic Material: Formulated to be safe for sensitive aquatic environments and general fluid transfer.
Compatible Systems:
-
Pumps: 7.1L/hr Peristaltic Dosing Pumps and high-flow metering units.
-
Fittings: Standard 8mm Metric Quick-Connect (Push-in) fittings.
-
Barbs: 5mm Metric barbed hose-tail connectors.
Size & Dimensions:
-
Outer Diameter (OD): 8 mm
-
Inner Diameter (ID): 5 mm
-
Length: Sold per meter
-
Weight: ~0.04 kg per meter

Reviews
There are no reviews yet.