Metric Tube 10/7mm – Black (PE)
Tubing & Fitting Compatibility Master Chart
| Tubing Description | OD (Outside) | ID (Inside) | Use Push-In Fitting | Use Barbed Fitting |
| ¼” RO Tubing | 1/4″ | ~4mm | 1/4″ Push-Fit | 4mm / 5mm Barb |
| ⅜” RO Tubing | 3/8″ | ~6mm | 3/8″ Push-Fit | 6mm Barb |
| ⅜” Brine Tubing | 3/8″ | 1/4″ | 3/8″ Push-Fit | 1/4″ (6mm) Barb |
| 6/4mm Dosing Tube | 6mm | 4mm | 6mm Metric | 4mm Barb |
| 8/5mm Dosing Tube | 8mm | 5mm | 8mm Metric | 5mm Barb |
| 10/7mm Metric Tube | 10mm | 7mm | 10mm Metric | 7mm Barb |
| 12/8mm Dosing Tube | 12mm | 8mm | 12mm Metric | 8mm Barb |
| ½” Brine (Heavy) | 1/2″ | ~10mm | 1/2″ Push-Fit | 10mm Barb |
| ½” Drain (PVC) | ~16mm | 1/2″ | Not Compatible | 1/2″ (13mm) Barb |
💡 How to Use This Chart:
1. Are you using a “Push-In” (Quick-Connect) Fitting?
Look at the OD (Outside Diameter). The tube must match the fitting size exactly.
Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!
2. Are you using a “Barbed” (Hose-Tail) Fitting?
Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.
Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.
3. Are you using a “Jaco” (Compression) Fitting?
These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.
Description
Full Description: A high-performance, 10mm metric semi-rigid transfer tube manufactured from UV-stabilized Polyethylene (PE). This tubing is specifically designed for environments where light exclusion is critical to prevent organic growth and maintain fluid integrity over long distances.
Uses & Applications:
-
Outdoor Nutrient Delivery: Ideal for hydroponic systems exposed to sunlight.
-
Aquarium Plumbing: Used for sump returns and manifold systems where algae prevention is required.
-
Industrial Metric Systems: Compatible with European-standard metric pneumatic and fluid installations.
-
Algae-Sensitive Filtration: Best used for water lines that pass through high-light areas or near windows.
Benefits:
-
Total UV Protection: Carbon-black impregnated material prevents UV degradation and brittleness.
-
Algae-Block Technology: 100% opaque wall stops light penetration, keeping the internal bore clean and free of bio-clogs.
-
Environmental Stress Resistance: High-grade PE construction resists cracking and chemical wear.
-
Metric Precision: Extruded to exacting tolerances for a perfect seal in metric push-fittings.
Compatible Systems:
-
Standard 10mm Metric Quick-Connect (Push-in) fittings
-
7mm Barbed hose-tail connectors
-
Metric-spec dosing and transfer pumps
Size & Dimensions:
-
Outer Diameter: 10 mm
-
Inner Diameter: 7 mm
-
Length: Sold per meter
-
Weight: ~0.06 kg per meter

Reviews
There are no reviews yet.