⅜ Reverse Osmosis Tubing -White P/m (Food-Grade LLDPE)
Tubing & Fitting Compatibility Master Chart
| Tubing Description | OD (Outside) | ID (Inside) | Use Push-In Fitting | Use Barbed Fitting |
| ¼” RO Tubing | 1/4″ | ~4mm | 1/4″ Push-Fit | 4mm / 5mm Barb |
| ⅜” RO Tubing | 3/8″ | ~6mm | 3/8″ Push-Fit | 6mm Barb |
| ⅜” Brine Tubing | 3/8″ | 1/4″ | 3/8″ Push-Fit | 1/4″ (6mm) Barb |
| 6/4mm Dosing Tube | 6mm | 4mm | 6mm Metric | 4mm Barb |
| 8/5mm Dosing Tube | 8mm | 5mm | 8mm Metric | 5mm Barb |
| 10/7mm Metric Tube | 10mm | 7mm | 10mm Metric | 7mm Barb |
| 12/8mm Dosing Tube | 12mm | 8mm | 12mm Metric | 8mm Barb |
| ½” Brine (Heavy) | 1/2″ | ~10mm | 1/2″ Push-Fit | 10mm Barb |
| ½” Drain (PVC) | ~16mm | 1/2″ | Not Compatible | 1/2″ (13mm) Barb |
💡 How to Use This Chart:
1. Are you using a “Push-In” (Quick-Connect) Fitting?
Look at the OD (Outside Diameter). The tube must match the fitting size exactly.
Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!
2. Are you using a “Barbed” (Hose-Tail) Fitting?
Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.
Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.
3. Are you using a “Jaco” (Compression) Fitting?
These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.
Description
-
⅜” Reverse Osmosis Tubing (White)
-
Size: 3/8″ OD (9.52mm)
-
Material: Food-Grade LLDPE
-
Description: A high-flow alternative to standard tubing. The larger diameter significantly reduces friction loss, allowing water to travel faster over longer distances.
-
Applications: Connecting storage tanks to faucets for a faster “pour,” or feeding high-output coffee machines and fridges.
-
Benefits: Delivers up to 50% more water volume per minute than 1/4″ tubing.
-
-
Size: 3/8″ OD (9.5mm)
-
Description: High-flow tubing for large systems or long-distance runs.
-
Best For: High-GPD systems (400+) and connections between tanks and faucets for increased flow rate.
Standard LLDPE semi-rigid tubing for push-fit connections.
SKU Size (OD) Color Best Application 1128 1/4″ (6.35mm) White Standard RO systems, fridge water lines, and undersink filters. 1129 3/8″ (9.5mm) White High-flow systems (400GPD+), long distance runs, and commercial coffee machines.

Reviews
There are no reviews yet.