50 GPD Domestic Reverse Osmosis ±7.5Lph 180L NoPump >60 psi

SKU: TQDRO-50GPD-1 Category:

Description

Stage Reverse Osmosis Water Purification System With Out Booster Pump.

The Reverse Osmosis (RO) system is one of the most complete under the counter systems available. It has the ability to eliminate up to 99.8% of harmful contaminants in water such as bacteria, viruses, lead, radium, chlorine, and arsenic. It makes use of a multi-stage filtration technology.

With the RO system, you can rest assured that your drinking water is clean, clear and healthy.

Specification:

Membrane:50GPD
Operation Pressure: 50-100psi
Dimension: 40x30x58cm (system and tank together)
Weight: 12 kg
Tank: 12 litre (28x28x37cm)
Total dissolved solids: 1200ppm max
Benefits:

Maintenance is easy and low cost
Filtrated water tastes and smells great
Promotes a healthy lifestyle
Hidden away out of sight, only a chrome tap is visible
No electricity needed
Removes 99.8% of all contaminants in water
Flushing of the membrane is done automatically
The low mineral content water is great for detoxifying your body
The low mineral content water helps to prevent and dissolve kidney stones
Delivers up to 380 litres (100 Gallons) of filtered water per day
Keep in mind:

The system has a water wastage rate of 4:1 due to constant flushing of the membrane, so for every 4 litres of clean, filtered water produced, 1 litre will be used to flush the system. The RO system removes 99.8% of the minerals from water, including those that are good for you. However, a Mineral Injector can be added to the system to replace some of the minerals if this is of serious concern.

An important thing to remember before installing any filtration system is to check, which pipe under the counter is bring the water to the tap and what size the source piping is. The standard household piping size is normally ½ inch (12.7mm) or ¾ inch (19 mm) thick. Some older houses have copper piping instead of newer systems and in such cases special attachments will be required to install the RO to the copper piping. In order to ensure that you do not have to buy additional adaptors due the connections not matching the piping, please check what type and size your piping is before ordering a filtration system.

A hole will have to be drilled into the counter or table where the RO tap will be placed. We can do this for granite tops at an additional cost.

The filters all have a certain life span and must be replaced to ensure that the system works effectively, specifically the sediment filter, Granular Activated Carbon, Carbon block and T33 Carbon (Taste and odour filter) which must be changed every 6 months.

The RO system requires a water pressure of between 3 and 6 bars (50 to 100 psi) to operate. If your water pressure is lower than 3 bar (- 50 psi), we recommend that you consider the RO system with the booster pump. If your water pressure is above 6 bars (+ 100 psi), we recommend that you also install a Pressure Regulator. Otherwise the system will be damaged.

Below is an outline of each filter and what exactly it removes from the water.

1st Stage: Sediment filter 10″”

The sediment filter removes large particles from the water that are visible to the human eye. These particles can include mud, rust, dirt, floating particles and any other large particles that may be in you your pre filtered water.
2nd Stage: Granular activated carbon filter (GAC) 10″”

The second stage is the granular activated carbon water filter; this filter will remove any chlorine or organic molecules (Which can cause bad taste and smells) that may be present in the water.
3rd Stage: Carbon block with 5 micron filter 10”

This filter is a block of carbon that is the next line of defence for any chlorine or organic molecules which have got through the second stage. It also has a 5 micron filter which is there to catch any carbon that might have broken off the 2nd and 3rd stages.
4th Stage: RO membrane

The RO membrane is what removes all the particles that are not visible to the human eye such as , pesticides , bacteria, herbicides, viruses , parasites and trace metals. This membrane is continually flushes so as to prevent blockages and a build-up of bacteria on the membrane which will result in water wastage.
5th Stage: Taste and odour filter (T33)

The taste and odour filter as you may have guessed removes any remaining molecules that may cause a bad taste to the water or a bad smell. This will leave you will the beautifully finished off water that tastes and smells great.
6th Stage: Mineral injector (Optional)

This is an optional but often ordered extra; it is the finishing if you like. The mineral injector replaces some of the good minerals that have been lost in our filtering process to attain pure water. The injector is placed after the taste and odour filter to help inject back some of the goodness that has been lost. Think of it as an extra boost to your water intake. You might have noticed some of these designer water bottles out there with added minerals; well this could be your designer water coming out of your tap or all your taps daily.
What’s in the box?

Here are the items and components that are included in the price:

Mounting bracket
10” Sediment filter
10” Granular Activated Carbon
10” Activated Carbon Block with 5 micron filter
Reverse Osmosis membrane (100 Gallon per day)
1 Plastic housing spanner (special tool for replacing the filters)
¼ inch White tubing
3 x 10” filter housings
RO membrane housing
RO tank
Chrome tap
T33 taste and odour filter
Pipe Fittings (Joins, Elbows, T – joints, non-return valve, and valves)

Reviews

There are no reviews yet.

Be the first to review “50 GPD Domestic Reverse Osmosis ±7.5Lph 180L NoPump >60 psi”

Your email address will not be published. Required fields are marked *