Brine Tubing ⅜OD x ¼ID Clear (LDPE)
Tubing & Fitting Compatibility Master Chart
| Tubing Description | OD (Outside) | ID (Inside) | Use Push-In Fitting | Use Barbed Fitting |
| ¼” RO Tubing | 1/4″ | ~4mm | 1/4″ Push-Fit | 4mm / 5mm Barb |
| ⅜” RO Tubing | 3/8″ | ~6mm | 3/8″ Push-Fit | 6mm Barb |
| ⅜” Brine Tubing | 3/8″ | 1/4″ | 3/8″ Push-Fit | 1/4″ (6mm) Barb |
| 6/4mm Dosing Tube | 6mm | 4mm | 6mm Metric | 4mm Barb |
| 8/5mm Dosing Tube | 8mm | 5mm | 8mm Metric | 5mm Barb |
| 10/7mm Metric Tube | 10mm | 7mm | 10mm Metric | 7mm Barb |
| 12/8mm Dosing Tube | 12mm | 8mm | 12mm Metric | 8mm Barb |
| ½” Brine (Heavy) | 1/2″ | ~10mm | 1/2″ Push-Fit | 10mm Barb |
| ½” Drain (PVC) | ~16mm | 1/2″ | Not Compatible | 1/2″ (13mm) Barb |
💡 How to Use This Chart:
1. Are you using a “Push-In” (Quick-Connect) Fitting?
Look at the OD (Outside Diameter). The tube must match the fitting size exactly.
Warning: A 1/4″ (6.35mm) tube will not fit correctly into a 6mm Metric fitting. They look similar but will leak!
2. Are you using a “Barbed” (Hose-Tail) Fitting?
Look at the ID (Inside Diameter). The “hole” of the tube must stretch over the ridges of the barb.
Pro-Tip: If the fit is tight, dip the end of the tube in hot water for 30 seconds to soften the plastic before pushing it onto the barb.
3. Are you using a “Jaco” (Compression) Fitting?
These fittings use a nut and a small plastic sleeve (ferrule). You must match the OD of the tube to the nut size. These are most common on Brine Tanks and older RO systems.
Description
Brine Tubing ⅜”OD x ¼”ID Clear (LDPE)
⅜-inch heavy-wall polyethylene tube designed specifically for water softener brine tanks. The thick-wall construction ensures the tube maintains its shape under the vacuum suction required for brine regeneration.
Uses & Applications: * Water softener brine draw lines
-
Heavy-duty RO concentrate (drain) lines
-
Nutrient delivery in hydroponic systems
Benefits: * Visual Monitoring: Clear finish allows for easy troubleshooting of air bubbles
-
Collapse Resistant: Reinforced wall thickness prevents pinching under vacuum
-
Chemical Stability: Highly resistant to concentrated salt (brine) solutions
-
Durable Service Life: Built to withstand frequent suction/discharge cycles
Compatible Systems: * Standard ⅜” Quick-Connect fittings
-
⅜” Jaco (Nut & Sleeve) compression fittings
-
Domestic and Light-Commercial Water Softeners
Size & Dimensions: * Dimensions: ⅜” OD (9.5mm) x ¼” ID (6.35mm)
-
Length: Sold per meter
-
Weight: ~0.04 kg per meter
Brine Tubing ⅜” OD x ¼” ID
Available in: Clear (ID: 1152) | Black (ID: 1142)
-
Standard Size: 3/8″ Outside Diameter | 1/4″ Inside Diameter
-
Wall Thickness: 1.58 mm (Heavy-Wall)
-
Description: A specialty polyethylene (PE) tube with a thicker wall than standard RO tubing. It is specifically engineered to handle the suction and discharge cycles of a water softener brine valve.
-
Uses & Applications:
-
Brine Draw: Connects the brine well in a salt tank to the control valve head (e.g., Fleck, Clack, or Runxin valves).
-
RO Waste Lines: Used as a durable drain line for under-sink RO systems.
-
-
Benefits:
-
Clear (1152): Perfect for troubleshooting; allows you to see if the brine is actually being drawn or if air bubbles are trapped in the line.
-
Black (1142): 100% UV-resistant and light-blocking. Essential if the brine tank is located near a window or outdoors to prevent algae growth in the salt water.
-
-
Connection Type: Fits 3/8″ Quick-Connect fittings or 3/8″ Jaco (compression) nuts.

Reviews
There are no reviews yet.