Stainless Steel Filter Housing 7 X 30 Inch
Stainless Steel (304 SS) Rounder Housings
| Part Number | Description | Key Feature |
| FH-LE-7-10 | SS LE-7 x 10″ Filter | Short Leg / Compact: Designed for tight spaces or lower flow rates. Features BSP threads for easy plumbing. |
| FH-LE-7-20 | SS LE-7 x 20″ Filter | Mid-Size: Standard whole-house or light industrial size. Offers double the capacity of the 10″. |
| FH-LE-7-30 | SS LE-7 x 30″ Filter | High Capacity: The industry standard for RO pre-filtration and commercial beverage systems. |
| FH-LE-7-40 | SS LE-7 x 40″ Filter | Maximum Flow: The longest standard single-vessel size, ideal for high-volume industrial water treatment. |
Why “Code 7” (LE-7) is Special
If these housings use the Code 7 connection (common for LE-7 series), they are significantly better than standard “Drop-in” filters for three reasons:
-
Zero Bypass: The double 226 O-rings create a vacuum-tight seal, ensuring 100% of the water passes through the filter, not around it.
-
Bayonet Lock: The cartridge “twists and locks” into the base. This prevents the filter from shifting or unseating during high-pressure surges or “water hammer.”
-
Sanitary Design: Code 7 filters usually have a “fin” on the top, making them easier to install and remove without touching the clean side of the filter media.
Grade 304 Stainless Steel Construction
-
Durability: These housings won’t crack, sun-rot, or cross-thread like plastic housings.
-
Heat Resistance: Suitable for hot water loops where plastic would soften or fail.
-
Appearance: The “Rounder” polished finish is easy to clean and looks professional in food-grade or pharmaceutical environments.
Description
Engineered for the Toughest Environments
-
304 or 316 Stainless Steel: Completely rust-proof and chemically resistant. Ideal for harsh water conditions, food-grade applications, or outdoor installations where UV rays would destroy plastic.
-
Size #2 (7″ x 30″) Capacity: This is the large-format industrial standard. It provides a massive “dirt-holding” capacity, meaning much longer intervals between filter changes compared to standard 10″ or 20″ units.
-
Threaded Closure: Features a heavy-duty threaded top or ring-nut closure. This design is preferred for high-pressure applications where a standard “clamp” might not provide enough security.
-
High-Temperature Rating: Unlike polypropylene (limited to 50°C), this stainless steel housing can safely handle hot water loops and industrial fluids up to 90°C+ (depending on the O-ring material used).
Why Choose Stainless Steel (SS) Over Plastic?
-
Pressure Spike Resistance: Steel doesn’t “fatigue” like plastic. It is far safer for systems prone to “water hammer” or high-pressure surges.
-
Sanitation: The smooth, non-porous internal surface prevents bacterial biofilm buildup, making it the preferred choice for food, beverage, and laboratory use.
-
Longevity: This is likely the last filter housing you will ever need to buy for a site. It won’t cross-thread, crack, or leak over time.
Ideal Applications
-
Commercial Hot Water Filtration: Protecting boilers and heat exchangers.
-
Borehole & Well Water: Handling abrasive sand and silt that might wear down plastic sumps.
-
Pre-UV Sterilization: Ensuring absolute clarity before water enters high-flow UV chambers.
-
Industrial Cooling Towers: Filtering debris from recirculating water loops.
Technical Specifications
| Feature | Specification |
| Material | Grade 304 or 316 Stainless Steel |
| Filter Size | Size #2 (approx. 7″ Diameter x 30″ Length) |
| Connection Type | Threaded Inlet/Outlet (Typically 1.5″ or 2″) |
| Max Pressure | Up to 150 – 300 PSI (Model Dependent) |
| Seal Material | EPDM or Viton O-Rings |
| Mounting | Includes heavy-duty integrated legs or wall bracket |
| Part Number | Housing Length | Typical Application | |||
| FH-LE-7-10 | 10 Inch | Laboratory use or small batch processing. | |||
| FH-LE-7-20 | 20 Inch | Standard commercial pre-filtration. | |||
| FH-LE-7-30 | 30 Inch | Industrial RO pre-treatment and beverage systems. | |||
| FH-LE-7-40 | 40 Inch | High-flow industrial water treatment. | |||
304 Stainless Steel (The Standard)
The “Workhorse” of the industry. 304 is the most common form of stainless steel used in water filtration worldwide.
-
Best For: Municipal (city) water, most borehole/well water, and indoor residential use.
-
Pros: Highly durable, excellent heat resistance, and more affordable than 316.
-
Cons: Susceptible to “pitting” or corrosion if exposed to high levels of salt (chlorides) or acidic environments.
-
Typical Use: Whole-house filters, food service, and standard commercial buildings.
316 Stainless Steel (The Premium)
The “Marine Grade” choice. 316 contains an extra ingredient called Molybdenum, which makes it incredibly resistant to chemicals and salts.
-
Best For: Coastal areas (sea air), saltwater applications, high-chlorine environments, and pharmaceutical or chemical processing.
-
Pros: Superior resistance to pitting and “crevice corrosion.” It is the most sanitary option for high-purity water.
-
Cons: More expensive than 304 (usually 20–30% more).
-
Typical Use: Beachfront homes, medical labs, breweries, and industrial chemical filtration.
Comparison Table: 304 vs. 316
| Feature | 304 Stainless Steel | 316 Stainless Steel |
| Common Name | “Standard” Stainless | “Marine Grade” Stainless |
| Chemical Formula | 18% Chromium, 8% Nickel | 16% Chromium, 10% Nickel, 2% Molybdenum |
| Salt/Chloride Resistance | Moderate | Excellent |
| Corrosion Resistance | High | Very High |
| Price Point | $$$ |
|
| Typical Location | Residential / General Commercial | Industrial / Coastal / High Purity |

Reviews
There are no reviews yet.